Cadence ZRS AMP 2-CHANNEL 2750 W RMS CLASS BASS SUBWOOFERS

Description

This is a very clean sounding A/B amp that can be used to power high end component systems or subwoofers. It has some general dings here and there but nothing major and the functionality is 100%. This is a 16v capable amp. Also the mono stereo button came off however you can still select either with a small flat head screw driver. This amp is currently installed and working 100%! The amp is over 2ft long and heavy. Please note that the 2200 wrms is at 12.5 volts. At 14.4 volts she'll do 25% more power for a total of 2750 watts rms. Add another 20% if you plan to run at 16 volts for a total of 3300 wrms. This amp is currently powering one Alpine 12" type R sub and needless to say the amp is turned way down. Amplifier Specifications:ZRS Type C2 2-Channel Class A/B High Current Competition Car Amplifier
RMS Power Rating at 12.5 volts:
4 ohms: 400 watts x 2 chan.
2 ohms: 700 watts x 2 chan.
1 ohms: 1100 watts x 2 chan.
Bridged, 2 ohms: 2200 watts x 1 chan.
Max power output: 4000 watts x 1 chan.
Minimum THD: < 0.01%
Frequency Response: 10Hz-86,000Hz
Signal to Noise Ratio: > 100dB
Damping Factor: > 200 @ 100Hz
Preamp Voltage: 200mV to 9Volt
Crossover Slope: 24dB
High Pass Crossover: 20(200)Hz-500(5K)Hz
High Pass Crossover Multiply : x1, x10
Low Pass Crossover: 50(500)Hz-500(5K)Hz
Low Pass Crossover Multiply : x1, x10
Suggested Inline Fuse: 150 amps x 1 (External)
General Features:
High Speed MosFET Power Supply
Bipolar Japanese Sanken Outputs
16V Capable Power Supply
Copper Rail PCB Architecture
12-24dB Crossover Circuitry
Bass Focus with Rumble Control
Preamp RCA Output
Adjustable Subsonic Filters
Adjustable Phase Control
Soft Start Mute and Delay
Power & Diagnostic LED Indicators
Twin Amp Bridgeable for 2x Power Output
Master/ Slave Configuration
0 gauge power and ground wiring is recommended for installation.
Dimensions: 11.6"
W
x 26"
L
x 2.7"
H