TARAMPS HD 3000 AMPLIFIER 1 OHM 3000W RMS - USA DEALER - SAME DAY SHIPPING

Description

HD 3000 1 Ohm Taramps Amplifier
With a maximum power of 3000 Watts RMS, the amplifier module of Taramps HD3000 is mono, impedance of 1 ohm and 1 channel. Perfectly match with all kinds of loudspeakers, drivers and tweeters in the right measure for you!
* This product comes with an M1 Led Monitor
Technical Information:
OPERATION CLASS
Class D
NUMBER OF CHANNELS
01
MAXIMUM POWER
@12.6VDC - 1 Ohm: 3000 Watts RMS
@12.6VDC - 2 Ohms: 2025 Watts RMS
@12.6VDC - 4 Ohms: 1140 Watts RMS
INPUT SENSITIVITY
230mV
SIGNAL TO NOISE RATIO
89dB
FREQUENCY RESPONSE
10Hz Hz ~ 20 kHz (-3dB)
CROSSOVER HIGH PASS (HPF)
10Hz ~ 80 Hz (-12dB/8ª) Variable
CROSSOVER LOW PASS (LPF)
80Hz ~ Full (-12dB/8ª) Variable
BASS BOOST
0 ~ 10.5dB (5 Hz)
THERMAL MANAGEMENT
Smart Cooler (fan controlled by temperature or audio, with 3 speeds)
EFFICIENCY
79%
INPUT IMPEDANCE
18K ohms
OUTPUT IMPEDANCE
1 Ohm
PROTECTION SYSTEM
Output Short circuit / High or Low supply voltage / Thermal protection
MIN. SUPPLY VOLTAGE
9 VDC
MAXIMUM POWER SUPPLY VOLTAGE
16 VDC
CONSUMPTION AT REST
1.8A
MAXIMUM MUSIC CONSUMPTION
@12.6VDC: 150.5A
MAXIMUM CONSUMPTION IN SINUSOIDAL SIGNAL
@12.6VDC (1kHz): 301A
DIMENSIONS (H X W X D)
9" x 2.56" x 7.32"
WEIGHT
4.4lbs
EAN
7898556840903
Warranty:
Taramps products come with a 1 year limited warranty from the manufacturer. This warranty does not cover: Burnt voice coils, abuse and damaged caused by improper use or installation, physical damage to the product cause by the consumer, installation charges incurred, damage to amplifiers when connected at less ohm load than specified by the manufacturer, damage to amplifiers caused by insufficient electrical requirements, water damage, excessive wear and tear, and any other cause implied in the warranty card supplied by the manufacturer.
Shipping:
We offer free Same-day shipping to the USA. For international shipping, please ask for availability.
Return Policy:
You may return most new, unopened items within 30 days of delivery for a full refund, less any shipping costs and re-stocking fees.
All items returned that are not defective, in NEW condition, and unopened will be applied a 15% re-stocking fee; this fee covers shipping expenses when sent and handling
We shall issue the refund upon return (once the item has arrived at our warehouse). All returns will be inspected upon arrival and applied a re-stocking fee of between 15% to 50% dependent on the condition of the item returned
The customer must ensure that the item is adequately wrapped, secured and that it includes all components (including free items) when returning the item
No components should be missing, including screws, manuals, cables, protective films, plastic coverings, etc. The item returned must be in NEW condition. The factory seal cannot be open in any case
FAILURE TO MEET ANY OF THESE REQUIREMENTS WILL RESULT IN A HIGHER RE-STOCKING FEE OR DENIAL OF RETURN REQUEST